Packs/Racks/Baskets

The waterproof Ortleib Two 1.6L Saddle-Bag is particularly suited for mountain and road biking, but is also an ideal supplementary bag for long tours with lots of luggage. It offers enough space for a spare tube, repair kit or rain jacket. The bag features highly luminescent reflectors and daisychains for fixing a tail light. - Roll closure is secured to the sides with buckles - Quick-release mounting system

Planet Bike's Versa Rack means your steed with disc brakes can finally be made into a rack-packing workhorse. It's 6061-aluminum construction provides maximum strength and stability. Thanks to the clever design you'll have complete heel clearance when you install packs. Plus, the pre-installed rack hardware makes it a cinch to mount the Versa Rack to your bike.

The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.

The Gas Tank is a high-end, high-volume top tube bag for carrying a ton of food and other gear. It offers substantial storage in an easy access case. Zip open a side for one-handed access while riding or open up both when stopped for full panel access to the contents. Fill it with M&M's, tools, a camera, bear spray, and whatever you need to have close at hand. Features: - One-handed zipper access while riding - Wrap-around, water-resistant zipper to keep your gear dry - Fully padded with closed-cell foam - Interior lined with yellow fabric for greater visibility - Hook and loop interior divider for organizing small stuff - Adjustable height daisy chain front attachment with a spacer block to clear stem clamp bolts - Top tube strap has gripper material with double back wrap for bomber stability - Made in the USA with domestic and imported materials. Sizing: - Length: 9" - Height at stem: 5" - Width at stem: 2.5" - Tapers down to 1.5" tall and 1.5" wide along the top tube Specifications: - Weight: 3.5 oz. - Volume: 70-80 cu. in. - Materials: VX42 X-pac, 1050-denier domestic ballistics nylon, 420-denier yellow lining, closed cell foam padded tube sections

• Constructed of impact resistant Nylon • Carry lightweight roundish objects such as insulated Nalgene bottle holders, thermoses, Gatorade jugs, small dry bags, and ultralight sleeping pads and shelters • Mounts to water bottle cage mounts via Salsa’s Three-Pack pattern • Includes two nylon straps • Cargo Weight Limit: 6.6lbs (3kg) • Cage Weight: 149g

Salsa's EXP Series Anything Cradle system is designed to create carrying capacity in front of your handlebars, while providing ample room for cables without fear of kinking them. This system is available as a complete "kit", or sold individually for custom set-ups. - Complete kit includes the cradle, the EXP Series Dry Bag, the EXP Series Anything Cradle Front Pouch, and EXP Series Anything Cradle Front Straps - Each part of the kit can be purchased individually - Modular system, using the EXP Series Dry Bags for the perfect carrying system or your own dry bag with a ladder strap system - Works with or without front pouch - "Ladder Lock" three-slot strap weave design that eliminates straps from slipping - Extremely versatile - Max. Load Weight: 8lbs (3.7kg)

The EXP Series Seat pack keeps gear high, centered, and in line with you and your bike. Much like a dry bag or stuff sack, the EXP Series Seat pack fits a wide range of load sizes, and dutifully carries anything you need on your next two-wheeled mission. - Water-resistant welded construction with waterproof fabrics - Roll type closure and air purging valve that allows for managing overall volume - Stretch cord storage on top - Durable 1000D material strategically placed in high wear areas - Weight: 380g - Capacity: 6 – 14 Liters

Lower mount kit for all Salsa's Alternator Racks (sold separately)

The Serfas LT-STM5 Waterproof Cell Phone Top Tube Bag safely keeps your mobile device mounted and within view as well as nice and dry if the sky decides to open up. The top facing see-through waterproof sleeve is touch-friendly so you can still easily "swipe right," or check local weather without having to remove your device. Mobile Device Not Included - Will Fit Mobile Phone Sizes Up To Apple iPhone 6 Plus - Touchscreen-Friendly See-Through Mobile Device Window - Credit Card Storage Pouches - Easy-To-Use Hook & Loop Attachment System - Hook & Look Closure System - Size: 7 x 3.5 x 4 inches - 98 Cubic Inch Bag Volume

- Main compartment designed to hold traditional grocery bag - Side zippered compartment - Integrated carrying handles - Includes removable shoulder strap - Mounts on rear rack with hooks and Velcro strap - Bag volume: 1100 c.i. - Size: 11.8x7.1x13.8" - Mount: Hook and Strap

- One large main compartment - Mounts to handlebar with hook and loop straps - Bag volume: 150 c.i. - Size: 8.6x4.7x4.7"

Here's a big basket to carry large loads. Sunlite's Rack Top Wire Basket attaches to your rear rack (sold separately) and sports sturdy steel construction.

- Timeless woven wood basket with clear coating for improved durability - Classy real leather straps with buckles - Material: Beech Wood, Dark Brown - Size (WxLxD): 13x8.5x10" - Weight Limit: 11lbs

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 26" city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs

Topeak's BabySeat II rear rack allows you to easily mount your BabySeat II (sold separately) to your 29er. This tubular aluminum rack features tabs that clear most rear disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger.

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender, too.

Topeak's MTX TrunkBag DX boasts an expandable main compartment to carry all the gear you need. It's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. Plus, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately). - Capacity 12.3 L / 750 ci - Compartments 1 Divided main compartmetn, two side zippered pockets, Multi-expanding top compartment - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 36 x 25 x 21.5-29 cm / 14.2” x 9.8” x 8.5”~11.4” - Weight: 985 g / 2.17 lb

Replacement stays for a variety of Tubus racks. Every roundstay is made out of solid aluminum, and they are available in various lengths and offsets. - 8mm diameter stay - Drilled for M5 bolts

A verstile basket that can manage anything from books to groceries. - Extended handlebar clamps allow greater clearance for shift and brake cables - Legs extend from approx. 14" to 22" when mounted to the axle or eyelets - Fits 7/8" to 31.8mm handlebars - Made in USA - Dimensions: 14 x 9 x 9"

Wald's medium size twin rear carrier basket is a durable way to carry heavier loads. With mounting points at both the seat stays and near the rear axle, you can haul more groceries, gear, or anything else you need to with less impact on your bicycle's handling. By placing the bulk of your load around the rear wheel, you increase your bicycle's stability. This allows you to carry 1-2 small grocery bags in each side basket with greater confidence and ease. - Made in U.S.A. (Maysville, KY) - These are 1-piece twin carrier baskets designed to fit on rear of the bicycle - Dimensions: 6.5 x 13.5 x 10 inches; tapers to 4.5 x 11.5 inches at the bottom - Rack is 5" by 13" long - Baskets can be mounted to frame eyelets or use the supplied mounting bracket - Legs have two axle mounting holes and one small hole to mount to the eyelet - 520 has a Zinc Plated Finish; 520GB has a Black Powder Coat Finish - Complete basket with fittings weighs 5.3 lbs.

By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers. - 2 Phillips head frame bolts in 1.5-inch (38mm) length - 2 Standoff spacers in 1-inch (25.4mm) length

Take a load off, quick. Introducing new Quick Release skewers for mounting the Bread Basket to your Yuba Cargo Bike. Now you can install or uninstall your Bread Basket with the turn of a quick release. Included: - Durable 6mm diameter steel skewers - Two cam washers for use with and without the Roots Kickstand (still in production). Compatible with Mundo V5, Boda Boda V3 and Spicy and Sweet Curry bikes. They can also be used on the Boda Boda V2 with a couple of spacers and the Mundo V4 with spacers and a slight frame modification.

Tie-down with steel buckle perfect for attaching boxes, surfboards, guitars, tools, and other bikes to a Yuba. - Each strap 9 feet (3 m.) long - Industrial quality - Brown - 1 pair per pack - Compatible with all Yuba Cargo Bikes

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

For all Ultimate 4 to Ultimate Six models, as well as the Barista, Velo-Pocket and Handlebar Basket Need to replace a lost or broken cable for your handlebar mount? - 1 wire cable (105 cm) with attachment screw

• Vinyl coated hooks • 9 mm diameter • Black

Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes

BiKASE's Handy Andy holds all iPhones (in and out of cases), Androids, such as Motorola's Bionic and Razor, the Samsung Galaxy and many more phones. It quickly, easily and securely mounts with the neoprene Velcro straps. Simply wrap them around your handlebars, stem, frame top tube, or even your backpack for easy access to your smart phone while riding. No tools are required! This phone pouch makes calling or navigating with a GPS or training app. simple. The see-through window allows viewing information while keeping your phone or device protected and lets you easily operate the touch screen and talk, too, with the phone in the case. A removable pad is included for those really thick phones.

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.